Browse all practice questions for the ABO Advance Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

ABO Advance Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which refractive error involves the eye's inability to focus at various distances?
  • Which optical measurement is critical for designing corrective eyeglasses?
  • Which of the following is commonly used as a mydriatic?
  • What is the primary purpose of using aspheric lenses in eyeglasses?
  • What does achromatic mean in the context of optics?
  • What does "apical clearance" refer to in lens fitting?
  • Assuming an index of refraction of 1.530, what is the back curve if the total power of the lens is -3.50D and the front curve is +4.00D?
  • Which of the following lenses typically provides better optical clarity?
  • Which type of lens has the same curvature in all meridians?
  • Which pharmaceutical is known to dilate the pupil for 3-6 hours?
  • What type of glasses often require consideration of vertical imbalance?
  • According to FDA drop ball specifications, which item is required in the test?
  • What is the tolerance for the refractive power of multifocal additions in prescription eyewear above 8.00D?
  • What is the main purpose of using prisms in optical design?
  • A patient with a best corrected central acuity of 20/200 is classified as:
  • Which condition involves unequal refractive power in the eye?
  • What is termed when white light passes through a prism and is broken down into component colors?
  • How does lens thickness influence vertical imbalance?
  • What is the seg drop when A=65mm, B=56mm, DBL=15mm, and the requested Seg Ht is 25mm?
  • What condition is represented by the following prescription: OD -1.25 OS -4.25?
  • Chromatic aberration primarily affects what aspect of a lens?
  • What percentage of UV light can a typical clear plastic lens block?
  • What does NLP stand for in eye examination terminology?
  • What condition is known to cause peripheral field loss?
  • Placing enough plus power in front of the eye to blur the patient's vision and limit accommodation is known as what?
  • Which of the following is NOT a characteristic of a minus lens?
  • Which muscle of the iris is primarily responsible for constricting the pupil?
  • Why is it beneficial to use aspheric lenses in dispensing situations?
  • What is an essential quality that consumers should be able to trust about their optician?
  • What is a refractive error where light rays do not focus at a single point?
  • What is the index of refraction of the cornea?
  • Which structure continuously produces aqueous fluid?
  • The effect of increasing the lens diameter on light gathering ability changes which aspect of light?
  • Which factor can typically enhance the power of a lens material?
  • Is Descemet's membrane able to regenerate well after injury?
  • What occurs to the eyes when accommodation is actively engaged?
  • According to recent findings, what percentage of eyewear in the USA has AR coating?
  • How many muscles are responsible for holding the eye in place?
  • When a patient returns with problems, which question is the least important to ask?
  • For telescopes, what is one primary characteristic of the reflecting type?
  • What does amblyopia refer to?
  • What does a toric transposition show?
  • Which of the following statements about the tear film is correct?
  • What condition results from damage to Bowman's layer in the eye?
  • What does the lipid layer of the tear film primarily prevent?
  • Which area of the retina is capable of perceiving the greatest amount of detail?
  • What federal agency oversees the production and approval of food and drug products?
  • At approximately how many microns thick is the aqueous layer of the tear film?
  • If the right temple is angled up, what effect does this adjustment have?
  • At what point does lens thickness affect lens power?
  • Is it true or false that prism is verified at the same location on a progressive addition lens as the distance RX?
  • What is the term for blood vessel growth in the cornea under stress?
  • What defines the location of the optic disk?
  • What term describes the state where rays of light converge at two different points of focus?
  • In lens context, what does the term substrate refer to?
  • What will the prescription read when converted to a single vision reading prescription?
  • What do the numbers on a telescope labeled 7x20, 7.5 indicate?
  • If the right temple is angled in, what will this adjustment do?
  • Which of the following describes pseudophakia?
  • To check accommodative facility, which of the following tools would you use?
  • Centers ground wide in minus lenses will typically result in:
  • What is the name of the fold of skin that protects the eye and cornea?
  • What effect do centers ground wide in plus lenses have on prism?
  • What does increasing the frequency of light correspond to in terms of energy?
  • For what reasons might an optician be sued in relation to patient care?
  • Which condition is typically assessed using tonometry?
  • Which of the following is true regarding the vertex distance in optical dispensing?
  • What purpose do the layers of the cornea serve?
  • If a patient is accommodating during a refraction, it may result in a prescription with too much _________ power.
  • Sagittal value for a plus lens is characterized by which thickness?
  • What does the term "apex" refer to in regards to prisms?
  • What measurement is equal to twice the longest radius from the geometric center of the lens to the apex of the edge?
  • What disorder is characterized by a buildup of fluid in the anterior chamber of the eye?
  • Which type of lenses do the traditional rules of base curve selection not accurately apply to?
  • What is the standard power for the intermediate portion of a trifocal lens?
  • What type of cataract is characterized by a fully developed opacity of the lens with fluid generation?
  • Which of the following describes a one-piece bifocal?
  • What does the term 'addition' mean in relation to multifocal lenses?
  • What happens to the pupil while reading or performing near vision tasks?
  • What occurs when the stroma is damaged?
  • What happens to the optical quality when the base curve is flattened too much on an aspheric lens?
  • When light passes from a denser to a less dense medium, it will typically do what?
  • What is the tolerance for the refractive power of the cylinder in prescription eyewear for powers above 4.50D according to ANSI standards?
  • In what range does the electromagnetic spectrum contain UV energy?
  • What is the minimum finished lens blank size available for an A=55mm, B=56mm, DBL=15mm, ED=56mm, and PD=60mm?
  • What term describes the condition in which both eyes have equal refractive power?
  • What is the cylinder axis tolerance for cylinder powers between 0.75 and 1.50 diopters according to ANSI Z80.1?
  • A refracting telescope primarily uses which of the following types of lenses?
  • What test is commonly used to help determine color deficiencies?
  • What is an arcuate stain?
  • Which characteristic is true for both refracting and reflecting telescopes?
  • Regarding a standard slab-off, which statement is correct?
  • What are ghost images in optical terms?
  • Which federal agency has adopted ANSI Z-87 standards for workplace and educational settings?
  • What is one advantage of the Galilean telescope?
  • Where do the two optic nerves converge in the brain?
  • Which invention greatly impacted the advancement of telescope technology?
  • In the boxing system, the horizontal measurement of a lens is referred to as the:
  • Which layer of the cornea is known for its regenerative properties?
  • Which type of lens is known to be the most impact resistant?
  • What is commonly associated with errors in lens design that lead to image inconsistencies?
  • For effective advertising, what is a priority for an optician in a competitive market?
  • What is the expected power at axis 60° for the given RX of -1.50 -2.00 x090?
  • When measuring a patient with a horizontal deviation, the Maddox rod should be positioned so that the line forms a _________.
  • A non-verbal determination of refractive error is known as what?
  • Which of the following best describes light?
  • Using the formula F=1/D, what is the focal length for a 6.00D lens?
  • What is the relationship between lens power and curvature?
  • Which lens condition is characterized by the inability of the eye to maintain focus on an object?
  • What is a characteristic of a plus lens?
  • In terms of vision, what does "Apex" refer to in the context of prisms?
  • Which condition is typically monitored for sudden changes in adult patients' prescriptions?
  • The term "minus cylinder" design in lenses refers to what aspect of manufacturing?
  • Which chemical property is critical for identifying safety eyewear?
  • What describes the function of Corning's Sunsensors in lens technology?
  • Should visible PALs lens markings on finished eyewear be removed prior to dispensing to the patient? True or False?
  • What type of frame partially exposes the lenses and holds them in place?
  • Which structure of the eye primarily controls light entry?
  • When performing the cover/uncover test, if the right eye moves inward when uncovered, the eye may have a _____phoria.
  • What refractive condition is caused by a damaged cornea, resulting in ray of light coming to many focal points on the retina?
  • The condition characterized by hypothyroidism affecting the eyes is known as?
  • What characteristic of a lens material affects its ability to bend light?
  • What characteristic does higher index of refraction offer in lens design?
  • How many muscles control the iris?
  • Birefringence is also referred to as what phenomenon that can result in distortion of visual performance?
  • Which structure is located between the choroid and root of the iris?
  • What does "apex" refer to in ocular terms?
  • Which method is most effective for reducing lens thickness?
  • An emmetropic eye is characterized by having adequate what?
  • What describes the refractive index of a material's effect on light bending?
  • Which visual problem is commonly referred to as nearsightedness?
  • Which of the following statements about emmetropic eyes is correct?
  • What percentage of humans experience alterations in lens transparency after the age of 65?
  • How much UV light is absorbed by a gray #3 crown glass lens?
  • Which condition is characterized by images not focusing properly on the retina?
  • All of the following are used in subjective testing except:
  • Which property of the cornea makes it the most powerful refracting medium in the eye?
  • Given frame measurements A=65mm, B=56mm, DBL=15mm, and a customer Distance PD of 60mm, what is the monocular decentration calculated?
  • What does the aqueous layer of the tear film contain?
  • Which of the following statements is false regarding corneal ulcers?
  • Which bridge type is similar to a saddle bridge but found on metal frames?
  • Which condition is described as anisometropia?
  • Which of the following statements regarding prisms is true?
  • A prism will displace the object being viewed towards its _____.
  • Regarding employed personnel, which group does the Office of Civil Rights oversee?
  • A +4.00D lens decentered 4mm creates how many diopters of induced prism?
  • What is the ANSI tolerance for variation on a specified base curve?
  • Spectacle lens power over what diopter strength requires compensation for vertex distance?
  • What company is known for introducing CR-39 lenses?
  • What is the definition of the index of refraction?
  • What is the purpose of the lacrimal glands?
  • According to federal law, what is the minimum center thickness required for lenses made for safety eyewear?
  • What aspect of lens design can lead to greater visual distortion in high-powered lenses?
  • When correcting astigmatism, what type of lens is typically used?
  • Which layer of the tear film is the thickest?
  • Which condition is commonly associated with aging and affects the ability to see close objects?
  • What is the primary purpose of using a Jackson cross cylinder in refraction?
  • Which term is NOT associated with an optical concept?
  • What primary attribute does a bitoric lens design offer?
  • What is vertex distance?
  • For a patient requiring no prescribed prism, where is the MRP located?
  • Each letter on an acuity chart subtends what angle to the eye at a given distance?
  • If the customer's pupillary distance is 60 and the finished eyewear pupillary distance is 56, what type of prism is induced?
  • Which sign indicates an abnormal bulging of the eyelid related to keratoconus?
  • How do you calculate the front curve required for a lens with a specific optical center?
  • Which statement is FALSE regarding a pair of binoculars?
  • When should a change in the base curve of a lens be considered?
  • Congenital color defects occur in what percentage of the male population?
  • What material is known to be the most impact resistant for eyewear?
  • How is acuity relevant to eye health?
  • Which of the following is NOT a function of the precorneal tear film?
  • What best describes FT-28 bifocals?
  • As a rule of thumb, differences in magnification over _____ from eye to eye are usually problematic to the wearer.
  • What is the most common issue caused by astigmatism?
  • What condition is characterized by pigmentary degeneration of the retina?
  • What is a secondary benefit of eyelid function?
  • What is the relationship between base curve selection and lens power changes?
  • At which reference point should a progressive lens be fitted?
  • Poor pupillary distance measurements can lead to which of the following issues?
  • The primary purpose of a "corrective curve" lens is to minimize what?
  • What is the approximate diopter value often associated with near prismatic imbalance?
  • Flattening the base curve randomly on a spherically ground lens will most likely result in which of the following?
  • What is the name of the aberration that can induce cylinder power in a spherical lens?
  • Two methods for orienting the polarized filters into lenses include ________.
  • Which aberration is of the greatest concern to a spectacle wearer?
  • What are the photosensitive receptors in the retina responsible for sharp visual acuity and color perception called?
  • What type of pupil response involves constriction when viewing near objects?
  • What is normally ground on the lens for a standard slab off?
  • What visual condition may lead to difficulties in reading or recognizing faces?
  • How do aspheric lenses affect peripheral vision compared to standard lenses?
  • It is generally desirable to maintain ocular side curves within which range?
  • What aspect is crucial for bifocals with near vision on the seg line?
  • What is the term for a tendency of the visual axis to deviate inward when the eyes are at rest?
  • Which function occurs due to the ciliary body?
  • What is the simplest means of identifying an unknown PALs lens?
  • What is the general term for the phenomena associated with wave patterns in light?
  • In which medium is the index of refraction lowest?
  • A scratch resistant coating on CR-39 plastic lenses makes them how many times more resistant to abrasion?
  • What factor must be considered when using telescopes for individuals with low vision?
  • What is the effect of fogging lenses on a patient during an eye exam?
  • What type of lenses are typically prescribed to counteract pseudomyopia?
  • In lens prescription terminology, what does 'axis' refer to?
  • Which of the following is NOT a characteristic of aspheric lenses?
  • What components make up the basic tear film?
  • For which visual task are polarized lenses not recommended?
  • What is the purpose of splitting prescribed prism?
  • What type of vision issue is indicated by the mix of plus and minus lens requirements in both eyes?
  • What are vacuum color coatings typically made from?
  • Which of the following is not a factor when determining magnification?
  • Which element is NOT critical when determining vertical imbalance?
  • The amount of prism used for prism thinning a progressive lens should equal what fraction of the add power?
  • The telescope design by Galileo is classified as what type, and what are its primary lenses called?
  • A plus lens moved downward from the primary position results in a:
  • If two lenses are ground with 2D of base down prism in each lens, how will the patient perceive this?
  • What is the role of the corneal epithelium in tear production?
  • What is the primary function of the ciliary muscle?
  • What fills the anterior chamber of the eye?
  • For an RX with centers ground wider than the patient's PD OU +3.00D, what is the expected prismatic effect for the wearer?
  • What is the true power of a CR-39 lens with a marked power of +4.00D front curve and -6.00D inside curve?
  • What does the term 'frame PD' refer to?
  • What is the index of refraction of a medium where light travels at approximately 109,412 miles per second?
  • What type of lens design is most commonly produced today?
  • What term is used to describe "double vision"?
  • What is the main benefit of using impact-resistant materials for lenses?
  • Which component of tears is specifically responsible for washing away debris and pathogens from the eye?
  • What type of prism effect does a standard slab-off create?
  • Sagittal value for a minus lens refers to which thickness characteristic?
  • Which material has an index of refraction of 1.59?
  • Which of the following describes a new type of aspheric lens design?
  • In optical interference, destructive wavelengths are ________.
  • What is the index of refraction of Trivex?
  • Which of the following best describes the significance of the critical meridian in lens design?
  • At the beginning of retinitis pigmentosa, which vision is primarily affected?
  • Which statement regarding cataracts is false?
  • At which reference point should a bifocal be fitted for a first-time wearer?
  • What is a characteristic of the dilator muscle of the iris?
  • Who introduced the first successful plastic photochromic lenses and when?
  • Should frame adjustments be made prior to measuring the fitting cross height for a progressive lens? True or False?
  • What role does the index of refraction play in lens design?
  • What is the focal length of a 2D lens when the formula F=1/D is applied?
  • What type of aberration is influenced by the material the lens is made from?
  • Which of these factors does NOT affect light behavior through lenses?
  • What does aberration mean in optics?
  • Which of these is NOT considered an abnormal condition of the crystalline lens?
  • What does the term 'higher order aberrations' typically refer to?
  • At which stage does retinitis pigmentosa start affecting vision the most?
  • What three components make up the fibrous tunic of the eye?
  • If the RX has OD -3.50 -1.00 x 075, what base curve would you select?
  • Corrected curve lenses are primarily designed to achieve what?
  • Centers ground wide in plus lenses will result in _________.
  • Spherical aberration and coma are primarily dependent on which factor?
  • According to the information provided, the crystalline lens is harder as a result of what?
  • Which set of numbers should be used when reading the base curve of a lens with a lens clock?
  • What is the transparent, colorless mass that fills the eyeball behind the lens?
  • If a lens has a higher index of refraction, what is the likely effect on its thickness?
  • What effect does a polarizing filter have on light?
  • What is the condition called that involves hereditary pigmentary degeneration of the retina causing loss of peripheral vision?
  • What anatomical structure is described as having a quadrangular pear-shaped structure?
  • What layer of the tear film serves as the oily layer?
  • Why is the retinoscope commonly used in eye examinations?
  • Which statement about the disadvantages of telescopes in low vision is incorrect?
  • Imbibe technology in lenses refers to what?
  • Which of the following agencies governs equal employment rights?
  • Which of the following is true regarding aberrations in lens design?
  • What adjustment is made in the prescription to limit distortion for individuals with significant refractive errors?
  • Which type of glass is primarily used for lenses that require high optical quality?
  • What does the term "corneal abrasion" describe?
  • If centers are ground narrow in plus lenses, what type of prism will this result in?
  • What does aphakia refer to in the context of eye health?
  • When calculating the power of thick lenses, which factors are taken into account?
  • The cross cylinder is primarily used to refine which aspect of vision?
  • What is the recommended degree of pantoscopic tilt when fitting a frame for a progressive lens patient?
  • Which element is NOT critical when determining vertical imbalance?
  • What is the term for the distance between the crest of two waves?
  • The phenomenon where different wavelengths in white light come into focus at different points is known as?
  • Is it appropriate for an eyecare business to use any means of advertising to succeed in a competitive market?
  • What is the cylinder axis tolerance for a 0.50D cylinder in prescription eyewear according to ANSI standards?
  • Which lens characteristic is most affected by the design and curvature of the lens?
  • If a consumer's needs exceed what an optician can provide, what should they be advised to do?
  • What is the function of the zonules of Zinn?
  • Which material is capable of passing the ANSI Z-87 High Impact Test along with polycarbonate?
  • What is the primary risk factor for developing Grave's disease?
  • What result does a center ground wide in minus lenses create?
  • How much slab-off should be ground for the given RX: OD: +6.00 -2.00 x 060, OS: +0.50 -3.00 x 135?
  • What is a congenital enlargement of the cornea called?
  • Which of the following factors is critical for assessing prismatic effects in lenses?
  • What is the seg height typically referred to in optical dispensing?
  • Which theory maximizes optics when using spherical curves?
  • What correction is represented by OD -2.00 and OS -2.50?
  • What is the power of a prism that can deviate a ray of light by 4cm at a distance of 1M?
  • What three factors influence the power of a lens?
  • As plus power increases, how should the selection of a base curve generally change?
  • What is the term for loss of vision without any apparent disease of the eye?
  • In which direction will a prism bend light?
  • What does the frame PD measurement represent?
  • A plus lens has the effect of what on light rays?
  • Which of the following is not considered one of the six aberrations in optics?
  • What is a common characteristic of photochromic lenses?
  • What is a critical rule when splitting prism?
  • According to Prentice's rule, the amount of induced prism is equal to which of the following?
  • On a normal frame with 10 to 12 degrees of pantoscopic tilt, where should the optical center be located?
  • What type of prism is created when forward-mounted lens centers are moved apart?
  • What anatomical structures serve as the first line of defense for the eyes, causing them to blink when touched?
  • What is another term used to refer to the eyelids?
  • Which eye condition is characterized by a decrease in visual acuity due to clouding of the lens?
  • The minimum necessary standards do not apply to disclosures including which of the following?
  • What is the result of a significant base down shift in lens orientation?
  • What happens to the effective power of a plus lens when it is moved closer to the eye?
  • As a plus lens is moved closer to the eye, it becomes ________.
  • Which of the following prescriptions is converted to a single vision intermediate prescription?
  • What type of astigmatism is indicated by the prescription +7.00 -3.00 x120?
  • What term describes an isolated area of lost vision or reduced sensitivity in the visual field?
  • In the boxing system, what does the B measurement represent?
  • Which condition is frequently associated with retinal detachment?
  • Photochromic lenses were introduced by ______ in ______.
  • How much displacement does 2D of △ produce at the distance of 1M?
  • Toric transposition is used to determine which aspect?
  • In optical interference, constructive wavelengths are ________.
  • Which term describes a tendency of one eye to deviate upward?
  • What happens to light as the density of a material increases?
  • If a prescription has a cylinder value of +1.50, what effect does this have on the lens?
  • In optics, what is the result of lens aberration?
  • Which of the following is not a refractive error?
  • What should consumers expect regarding the quality of eyecare and eyewear?
  • For a patient with esophoria, which direction would their eye move when uncovered?
  • Which part of the human eye serves a function similar to that of the lens, focusing mechanism, and film of a camera?
  • What percentage of the eye's vision is accounted for by higher order aberrations?
  • What is the typical application of particles in lenses with a lower index of refraction?
  • What characterizes aniseikonia?
  • What is described as the single curve on the front surface of a lens?
  • The smallest diameter blank for lens cutting is determined by what method?
  • What is true about the size of the aperture on a pair of binoculars?
  • Most aberrations are considered off-axis viewing errors when?
  • What is a common characteristic of materials used for vacuum color coating on lenses?
  • What is a straightforward description of a minus lens?
  • What is the index of refraction of the crystalline lens?
  • What must be added to the center thickness to predict lens thickness using the sag formula?
  • Which of the following can be a result of using mydriatic substances?
  • ANSI standards specify that for Refractive Power above 6.50D, what is the acceptable tolerance?
  • Which cell types are found in the epithelium layer of the cornea?
  • Which situation could lead to a parallax error when taking seg height measurements?
  • Which of the following materials will yield the greatest front surface power when made with the same radius of curvature on the front surface?
  • What controls accommodation by changing the shape of the crystalline lens?
  • When the given prescription is transposed, what does it read?
  • What type of pharmaceuticals should be avoided in a patient with a narrow angle in the anterior chamber?
  • What will the lens thickness computation indicate for a sphere powered lens?
  • What should be assessed when evaluating for vertical imbalance?
  • What happens to a plus power lens when it is moved closer to the eye?
  • Why is it critical for an optician to refer consumers when their needs exceed provided services?
  • Which type of lenses are designed for focusing on objects 14" to 18" away from the eye?
  • If the optical center placement of eyewear is 2mm lower than the customer's line of sight, what type of prism has been induced in a plus power RX?
  • If a patient misses two letters on the 20/30 acuity line, how should their acuity be recorded?
  • Which type of crown glass bifocal lens minimizes chromatic aberration?
  • An Amsler's grid is recommended for daily use by patients with which condition?
  • In what unit are base curves typically designated?
  • If a patient sees the red side clearer during a monocular duochrome test, the focal point is:
  • What tool is used to measure the axis of resultant prism once drawn out on paper?
  • For a first-time wearer, at which reference point should a trifocal be fitted?
  • What is the condition called when the eye cannot focus at near due to lack of accommodation?
  • Which layer of the cornea contains squamous, wing, and basal cells?
  • What is the name of the distortion affecting image shape when wearing high plus lenses?
  • Where is the point of most acute vision located?
  • What characterizes an aspheric lens?
  • What is one response to watch for during a pupil examination?
  • If the patient reports that the GREEN SIDE is CLEARER during the binocular duochrome test, what should you add to both eyes?
  • What type of vision issue is twilight myopia related to?
  • What is a potential cause of increased intraocular pressure associated with ocular hypertension?
  • What does a 7.5-degree field of view in a telescope indicate?
  • What is a potential danger of visible glare?
  • Which aberration occurs when a wide beam of light passes obliquely through a lens?
  • What condition can prolonged exposure to UV light cause?
  • What is the compensated vertex measurement for the given RX of -12.00?
  • What is accommodation in the context of vision?
  • Which is not a part of the first tunic of the eye?
  • What aspect does double refraction affect in terms of visual performance?
  • Which type of aberration affects image shape when wearing high minus lenses?
  • What is indicated by the "10/42" specification on binoculars?
  • What condition could occur if one eye has a refractive error of OD -1.00 and the other has OS -2.25?
  • What does "farsighted" refer to in terms of eye condition?
  • In lens design, what phenomenon results from light entering at oblique angles?
  • When checking the near power of a front surface progressive lens, which side should face the operator?
  • Which refractive body in the eye has the highest index of refraction?
  • Which of the following lenses is known for its high impact resistance?
  • If a patient is prescribed a -12.00D spherical lens and the lens is moved closer to their eyes, what will happen to the effective power?
  • What aberration occurs when a lens disperses white light into its component colors?
  • Which aberration is produced when a narrow beam of light passes obliquely through a lens?
  • What is the radius of curvature for a lens with a power of 4.00D?
  • What is primarily affected in an astigmatic eye?
  • What is the refractive index of the cornea?
  • What condition occurs when rays of light from a distant source focus in front of the retina?
  • What is primarily reduced by using black lenses compared to clear lenses?
  • What part of the eye is primarily nourished by aqueous humor?
  • Which type of aberration results in uneven focus across a lens?
  • True or False: The crystalline lens in a newborn is the same size as in an adult.
  • A patient is prescribed a +15.00D sphere with a fitting distance of 13mm, but the wearing distance is 16mm. What is the compensated lens power that will be supplied?
  • What aberration is induced by pantoscopic tilt in eyewear?
  • Which test can help determine the stability of a patient's accommodation?
  • Which part of the eye is primarily responsible for detecting light and dark?
  • What type of lens aberration is characterized by an inward curvature in strong plus lenses?
  • The fibrous tunic of the eye includes which of the following components?
  • What is the composition of Aqueous Tears?
  • Which material provides the thinnest lens profile for a -15.00 D sphere?
  • Where does fusion occur in the visual process?
  • What characteristic is true regarding semi-finished lenses?
  • According to ANSI standards, what is the tolerance for the refractive power of the sphere in prescription eyewear for powers of 0.00 - 6.50D?
  • Calculate the dioptric value of a CR-39 lens with a radius of curvature of 0.645m.
  • What effect does decentering a lens have on induced prism?
  • For how long must customer records regarding impact resistance be retained?
  • A patient's record shows a prescription of OD +2.50 OS NLP. In their left eye, the patient is _________.
  • What do rays emanating from a point source of light do?
  • Which of the following best describes a cataract?
  • What term describes the condition where the eyes turn in opposite directions?
  • Two meters equals how many centimeters?
  • What is the lens aberration that causes a shorter focal length for rays near the edge of the lens?
  • What is the condition called when rays of light converge behind the retina?
  • The near point of convergence is reached when the test object:
  • Which type of patient would benefit most from AR coating?
  • What is the average intraocular pressure (IOP) reading that is considered of concern?
  • How do you calculate the total power of a lens with a front curve of +8.00D and a back curve of -5.00D, assuming an index of refraction of 1.530?
  • What is the common term for amblyopia?
  • Which of the following statements about transposition is false?
  • Using technical terms like slab-off and biocentric grinding when addressing patients will often result in what?
  • What does the term "additional amount of plus power" refer to?
  • The amplitude of accommodation for a 60-year-old patient is approximately how much?
  • A comprehensive eye exam is known as what?
  • The working lens used in retinoscopy simulates working at what distance?
  • What term is used to describe a difference in pupil size?
  • A Keplerian telescope is characterized by what specific lens arrangement?
  • How far from the lens center are the engraved markings on a progressive lens typically located?
  • Which layer of the cornea comprises 90% of its thickness?
  • What is a disadvantage of randomly flattening spherical curves in lens design?
  • One way to remind employees to maintain patients' confidentiality is to do what?
  • Which term refers to Protected Health Information?
  • The crystalline lens exhibits growth throughout life due to what process?
  • What are the three types of UV rays?
  • What should be included in the patient care training for opticians?
  • Which aspect of binocular performance improves with a larger aperture?
  • What element is NOT influenced by the blinking action of the eyelids?
  • Which prescription would cause the greatest prismatic imbalance at a reading depth of 10mm?
  • Which of the following is a common effect of Cyclopentolate?
  • Which of the following is NOT a function of the eyelids?
  • What effect does a prism have on an image?
  • For creating high-powered lenses, which material is often chosen for its superior refractive properties?
  • Which prescription would correct hyperphoria?
  • Grinding two separate curves on the front side of a lens is referred to as what?
  • What are some factors influencing the darkening or lightening of photochromic lenses?
  • In a "plus cylinder" design lens, what is referred to as the base curve?
  • Which remedy should NOT be used if pads dig into the sides of the nose?
  • A patient is prescribed a +12.00D sphere with a fitting distance of 13mm. When the eyewear is dispensed at a wearing distance of 8mm, how will the lenses feel to the customer?
  • What are the five layers of the cornea from anterior to posterior?
  • What type of astigmatism is represented by the RX +0.50 -1.00 x035?
  • How do photochromic lenses respond to sunlight?
  • What is the average size of the orbital margin in adults?
  • What is the term for the space between the back of the iris and the front of the lens that is filled with aqueous fluid?
  • When splitting prism, what is always important to keep consistent?
  • What is the relation of higher magnification telescopes to focal length?
  • What ocular disease is characterized by a sustained increase in intraocular pressure?
  • What is the condition called when the refractive error of one eye significantly differs from that of the other?
  • Which condition could cause a sudden change in prescription in an adult patient?
  • Which condition is characterized by the eye being unable to focus on near objects?
  • A diverging lens produces what type of image?
  • What type of refractive error results in two points of focus falling behind the retina?
  • Ametropia is defined as what type of condition?
  • What is the primary benefit of photochromic lenses?
  • When performing a refraction test, what is indicated by the patient experiencing blur when the test object is too close?
  • When parallel rays of light enter a prism, the light is deviated towards:
  • If a prism can displace an image one centimeter at a distance of one meter, what is its power?
  • How many tunics make up the structure of the eye?
  • When calibrating a lens clock, what surface should be measured to obtain a zero reading?
  • Which part of the eye provides nourishment to the retina?
  • Is ethical conduct a consideration in the profession of ophthalmic professionals?
  • What might be a consequence of achieving good cosmetics in lens design?
  • Which prescription has the greatest power at 90°?
  • What is the approximate speed of light in air?
  • What is the focal length of a one diopter lens?
  • What is the base direction of the prism induced when the customer's PD is greater than the finished eyewear PD?
  • Which of the following statements accurately describes aspheric lenses?
  • What does the prism measurement in a lens indicate?
  • One meter is equal to how many inches?
  • What is the visual consequence of amblyopia?
  • What happens to light as the index of refraction increases?
  • Which of the following statements regarding the Sag lens formula is correct?
  • On which type of surface will a lens clock provide an inaccurate reading?
  • What is the recommended OC height placement if B measurement is less than the OC height requested?
  • What is the ANSI Z80.1 distance refractive power tolerance for powers above 6.50D?
  • Which tool is specifically used to measure vertex distance?
  • Is certification by the American Board of Opticianry sufficient for practicing as an optician in any state?
  • Which lens treatment helps to increase light transmission and reduce reflections?
  • Which condition is characterized by the enlargement of the thyroid gland?
  • Does Medicare cover the cost of spectacles?
  • When checking the distance power of a progressive lens, which side should face the operator?
  • What should an optician check if a consumer reports their old glasses give better vision than their new ones with the same prescription?
  • What is the primary purpose of aqueous humor?
  • What is the condition when one eye requires a plus lens while the other requires a minus lens?
  • Where is the optical center for near vision located in executive bifocals?
  • In which type of bifocal is the optical center for near vision located in the geometric center of the segment?
  • Which part of the eye has the greatest dioptric power?
  • The index of refraction of a transparent material can be determined by:
  • What can elevated eye pressure potentially cause?
  • An uncut lens must be at least how many mm in diameter to allow the cutting of a 48mm round lens, decentered 4mm in?
  • What defines ocular hypertension?
  • What happens to the light motion in meridians when the examiner approaches the patient's eye during retinoscopy?
  • Which lens type inherently possesses UV filtering properties?
  • How can a plus lens be simplistically described?
  • A patient may experience photophobia and poor near vision after what procedure?
  • What will be the result of decentering a plus lens upward?
  • Which theory describes light as traveling through space in small bursts of energy?
  • What index of refraction is used for calculating tools (laps) and lens curves?
  • How much UV is absorbed by a tinted CR-39 lens?
  • When light passes through a lens or prism, it bends towards which part?
  • What feature is NOT associated with Trivex lenses?
  • What condition is described by the eyelids being turned outward?
  • Grave's disease may lead to which eye condition?
  • What is the primary function of the precorneal tear film?
  • In an aspheric lens design, how does the surface curvature behave?
  • What is the primary function of the sclera?
  • Which glands are responsible for secreting the aqueous layer of the tear film?
  • What instrument provides information on a patient's refractive status by reflecting light off the retina?
  • Which factors can affect lens power?
  • What describes the most popular type of temple design?
  • How should you compute the vertical imbalance given the RX: OD +1.00 OS -0.25 Add +1.00?
  • In the boxing system, the vertical measurement of a lens is known as the:
  • What is a major benefit of using a telescope in low vision assessments?
  • What is the main benefit of a scratch resistant coating for CR-39 lenses?
  • What term refers to an approximation of lens surface curvature marked on the lens box?
  • What is the first step in verifying a prescription with a manual lensometer?
  • What is the key reason that binoculars for sporting events should not have the most magnification possible?
  • What is the total base up prism in the lens if it has 2D base up and 5.00 prism D auxiliary prism positioned base down?
  • Which measurement does not affect the fitting of eyewear?
  • What is the longest horizontal width of boxed eyewear referred to in the boxing system?
  • Which statement about the advantages of telescopes in low vision is incorrect?
  • What is the term for the eye's ability to focus on objects at varying distances?
  • The area in the field of vision without rods or cones is known as what?
  • What is the approximate reflection percentage of each surface of CR-39 lenses?
  • What is the major cause of vertical imbalance?
  • Marginal astigmatism is a concern related to which of the following?
  • Which of the following is NOT a characteristic of a plus lens?
  • What type of telescope uses a refracting lens as its objective?
  • Where is the physiologic blind spot located?
  • A 3.00 prism will deviate a ray of light how far at a distance of 5 meters?
  • When selecting a base curve for an aspheric lens, what is a helpful guideline to follow?
  • What is the generally understood wavelength range of visible light?
  • Which component of the tear film is mainly responsible for hydrating the eye?
  • What happens when light hits a lens?
  • What is the correct method to adjust a lensometer for prism measurement?
  • Which factor contributes to the risk of prism-induced symptoms?
  • If a patient must move the reading material to the side to see clearly, what does it suggest about the pupillary measurements?
  • The quality of today's polycarbonate lenses has improved due to demand for what product?
  • What is the duration for which impact resistance records are required to be kept by the FDA?
  • What percentage of UV is absorbed by a clear CR-39 lens?
  • What is the process called when light changes direction as it passes from one transparent medium to another?
  • As minus power increases, what adjustment should be made to the base curve?
  • What quality of flint glass makes it suitable for optical lens production?
  • Which characteristic defines a round segment bifocal lens?
  • What is the main function of rods in the eye?
  • In optics, which term refers to the measure of how much a lens converges or diverges light?
  • Which factor is NOT significant in identifying vertical imbalance problems?
  • What is the anterior chamber of the eye?
  • Which of the following is NOT a condition of the retina?
  • What average vertical diameter range is given for the iris?
  • Which term refers to a refractive error in which images do not focus properly on the retina?
  • A prism diopter measures what in relation to prism at a given distance?
  • Light behaves as which of the following when traveling through a vacuum?
  • What is the highest tolerance allowed for a prism according to ANSI standards?
  • What effect does a base down prism have on vision?
  • What aberration causes a planar object to project as a curved image?
  • If a lens is decentered by 5mm, how much prism is induced with the RX -3.50 -1.00 x090?
  • When looking down, which condition causes the lower eyelid to bulge abnormally?
  • If an optical cross has the following powers: 035= -1.25/125= -2.00, what is the prescription?
  • What is the common name for the tissue that shapes and protects the eye, known as the white of the eye?
  • What is typically the index of refraction for standard plastic lenses?
  • Which theory relates to matching power and curvature of lenses?
  • What is defined as the measurement from the back surface of the lens to the point of focus of the light rays?
  • What is the critical meridian of total lens when addressing vertical imbalance?
  • How far away from the Snellen chart must a patient be standing or seated?
  • What is the primary function of the ciliary body in the eye?
  • What type of light refraction does an achromatic lens achieve?
  • What condition involves the gradual loss of transparency of the crystalline lens?
  • Which of the following is NOT included in the definition of TPO (Treatment, Payment, or Health Care Operations)?
  • Pseudomyopia can be relieved with which type of lenses?
  • How much UV is absorbed by a clear crown glass lens?
  • Which of the following is included in the contents of the bony orbit?
  • What is a primary function of Aqueous Tears in the human eye?
  • What is the condition called when light rays from a distant source focus behind the retina?
  • How much slab-off should be ground for the prescription OD +4.00 +1.00x060 and OS +0.50 +3.00x045 with a +2.50 add?
  • As a rule of thumb, a difference in magnification over what percentage from eye to eye is usually problematic for the wearer?
  • How do you calculate the total power of a lens with both spherical and cylindrical components?
  • What is a disadvantage of the Galilean telescope?
  • Which type of UV ray is known for its highest energy?
  • What is the prism tolerance for a mounted pair of eyeglasses in the horizontal meridian according to ANSI standards?
  • What is NOT an attribute of aspheric lenses?
  • What is the index of refraction for a crown glass lens?
  • Which condition can result in a presbyopic eye?
  • What type of bridge on a synthetic frame helps distribute weight equally on both sides of the bridge?
  • What type of astigmatism is represented by the RX Plano +1.00 x020?
  • What material are polarized filters made from?
  • Which type of UV radiation is primarily responsible for sunburns?
  • During the near point convergence test, the point at which the patient reports double vision is known as the _______ point.
  • What does ED refer to in the context of eyewear measurements?
  • The first practical reflector design telescopes were introduced in which year, and by which inventor?
  • What is the prescription for the reading level when the total prism is determined?
  • What phenomenon describes a lens' inability to focus light rays from different colors at the same point?
  • Which aberrations are categorized as "narrow beam" aberrations?
  • If a patient must lower their head to see clearly in the distance, what does this indicate about the position of the progressive lenses?
  • When new progressive lenses are delivered, where should the fitting cross be positioned?
  • What benefit do aspheric lenses provide?
  • Which of the following statements is a requirement for clear vision related to the cornea?
  • What is the heaviest type of bifocal lens?
  • Based on the provided RX +1.50 +2.00 x045, how much prism is induced when decentered out 8mm?
  • Which lens generally has a lower index of refraction compared to crown glass?
  • What is the term for the light rays passing through the edges of a lens being refracted more than those passing through the center?
  • When lens centers are ground wider than the pupil distance, what is the prismatic effect for the wearer?
  • What condition results from the loss of elasticity of the crystalline lens, making near vision difficult?
  • When converting an RX, which of the following adjustments results in minus power prescriptions?
  • What role does the tear film play in the health of the cornea?
  • What is the average refractive power of the cornea?
  • Which nerve carries impulses from the retina to the brain?
  • If the computed thickness is greater than what the patient would accept, what should the dispenser do?
  • Which type of bridge is not designed for equal weight distribution on a synthetic frame?
  • Which type of lens is typically used to correct for positive spherical aberration?
  • Which method is used to objectively assess refractive error?
  • Which of the following components of the tears serves to lubricate the eye?
  • Which aspect of the tear film aids in clear vision?
  • Which telescope type is classified as a reflecting telescope?
  • When reading, how much more will a patient need to converge with a new RX that has a large increase in plus power?
  • What is an early symptom of age-related macular degeneration?
  • For a B measurement of 54mm and an OC height requested of 32mm, where will the OC placement be?
  • Which lens type has an index of refraction of 1.498?
  • What defines the apex of a prism?
  • Resultant prism refers to what specific phenomenon in lens prescription?
  • Which color is known to absorb light effectively?
  • What is aqueous humor?
  • What optical phenomena do the terms "pincushion" and "barrel" describe?
  • What happens in a case of ambylopia?
  • Which lens design could potentially eliminate most lower order aberrations in lenses?
  • A patient diagnosed with amblyopia is characterized by which condition?
  • What is one of the primary purposes of the eyelids?
  • When viewing an object through a prism, the object is displaced towards its ________.
  • Which type of astigmatism is indicated by the prescription: -0.25 -0.25 x105?
  • Which statement about prism is TRUE?
  • What safeguards should businesses implement to protect private information?
  • What is the name given to raised yellowish tissue on the conjunctiva?
  • To enhance image quality in telescopes, what is often corrected for?
  • What is the role of the cornea in the eye?
  • What does spherical aberration in a lens cause?
  • Which lens material is most commonly recommended for children's eyewear due to safety?
  • Which material absorbs the least UV radiation?
  • What does the term 'refraction' generally refer to in optics?
  • What is the primary challenge associated with lens design in relation to marginal astigmatism?
  • Why would an ECP perform a test using the tonometer?
  • Which lens option is designed specifically for individuals with presbyopia?
  • Clinically, higher order aberrations have a predictable effect on vision and include all of the following EXCEPT what?
  • What is the main focusing structure of the eye?
  • Which of the following is NOT a disease or condition related to UV exposure?
  • What does a standard refraction typically fail to detect?
  • Designers of corrected curve lenses primarily focus on which type of aberration?
  • What transmits impulses from the retina to the brain?
  • When configuring lenses for high prescription strengths, what is a key consideration?
  • What visual condition can develop due to prolonged use of pharmacological agents that dilate the pupils?
  • What does OSHA do regarding workplace safety?
  • The relationship between a lens's focal length and its curvature is important for understanding what?
  • In poor lighting conditions, which color light is perceived better by the eye?
  • Who is most often troubled by vertical imbalance?
  • As the pantoscopic tilt is increased, what should happen to the distance optical center?
  • Latent hyperopes and children especially require what type of refraction?
  • Grave's disease is primarily associated with which condition?
  • What happens to light rays as they pass through the edges of a high index lens?
  • Increasing the diameter of a minus power lens always increases its:
  • What is commonly done during a refraction test?
  • What is an advantage of the Keplerian telescope?
  • If a plus power lens is moved away from the eye, how does it feel?
  • What term is used to describe metal temples that wrap around the ear?
  • Is it true that telescopes with the highest magnification are generally suggested for surgical applications?
  • What adjustment should be made if a patient's frame fits too tightly at the temples?
  • Which organization develops standards that cover sports-related eyewear products?
  • What is the primary function of rods in relation to vision?
  • Which of the following prism conditions would likely not be noticed by the wearer?
  • What is the focal length of a 10D lens?
  • What is the sensitivity range of human eyes to wavelengths of energy in the electromagnetic spectrum?
  • According to FDA drop ball specifications, what is the approximate weight of the drop ball?
  • Poor optical center height measurements will result in which kind of prisms?
  • What is critical for ensuring optimal visual performance in lens design?
  • Which tests are commonly used to determine ocular integrity?
  • In a cylinder lens, what happens if the strongest meridian does not run exactly through the E.D. meridian?
  • Which of the following statements is correct regarding the field of view for both telescope types?
  • What is the recommended approach to fitting spectacle lenses?
  • True or False: Irregular astigmatism can be caused by corneal dystrophy.
  • Where in the eye is the fovea located?
  • What condition is evaluated using an Amsler's grid?
  • What instrument is commonly used to check for lateral and vertical phorias?
  • What are the three layers of the tear film?
  • After reaching neutrality with a retinoscope, if the examiner moves closer to the patient, they should observe _______ motion in all meridians.
  • In terms of image orientation, how is a Keplerian telescope different from a Galilean telescope?
  • Which type of PD measurement is taken for fitting a progressive lens?
  • What method is recommended to verify the position of the segment before ordering a multifocal lens?
  • What term refers to the real measured or sagged curve that exists on the surface of a lens?
  • What is a disadvantage of the Keplerian telescope?
  • Irregular astigmatism is commonly caused by which of the following?
  • Which lens treatment is effective in reducing edge thickness for high minus lenses?
  • A prism will bend light towards its _______.
  • What is the standard index of refraction for a lens measure calibration?
  • What type of lens correction is typically used for hyperopia?
  • What is the term for a chronic swelling or blockage of a meibomian gland?
  • What type of lenses allow a person to see objects up close, typically used by presbyopic patients?
  • Why is edge polishing an important treatment for high minus lenses?
  • What does cycloplegic refraction help to determine?
  • Which layer of the cornea is considered the outermost?
  • What is the ANSI Z80.1 tolerance for vertical prism measurement?
  • What does the prescription OD +1.25 OS -1.25 represent?
  • What does the term "apical bearing" refer to?
  • What causes the color changing effect in photochromic lenses?
  • Which photoreceptor type enables us to see in dim light?
  • What condition does astigmatism describe?
  • What part of the retina is located on the visual axis?
  • Martins formula is primarily concerned with what aspect of lenses?
  • What is the thickness of the lipid layer in the tear film approximately?
  • In what year were the first functional telescopes introduced, and by whom?
  • How do the eyelids help the eye maintain health?
  • Which part of the optical system is considered the first refracting medium of the eye?
  • What term describes vertical misalignment due to a twisted bridge in eyewear?
  • Which prescription type benefits most from using an aspheric design in terms of thickness reduction?
  • What type of cells primarily composes the inner layer of the retina?
  • True or False: Ciliary body contains ciliary muscle and is crucial for lens accommodation.
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy